How to Install 3rd Gen Tacoma Front Recovery Points (2016–2023)

How to Install 3rd Gen Tacoma Front Recovery Points (2016–2023)

Installing the Bonobo Products Front Billet Recovery Points on your 2016–2023 Toyota Tacoma is quick and straightforward. These recovery points are designed as a direct bolt-on upgrade that uses the factory mounting location and OEM hardware. No cutting, drilling, or modifications are required.

Whether you're getting your Tacoma ready for the trail or simply upgrading its appearance, this guide will walk you through the installation process.

Vehicle Compatibility

This installation guide applies to:

  • Toyota Tacoma (2016–2023)
  • 3rd Generation Tacoma

Tools Required

  • Socket wrench
  • Appropriate socket for the factory mounting bolt
  • Torque wrench (recommended)

Step 1 – Locate the Factory Mounting Bolt

Begin by locating the factory mounting bolt on the front of your Tacoma where the recovery point will be installed.

Step 2 – Remove the OEM Bolt

Using a socket wrench, remove the factory mounting bolt. Set the bolt aside, as it will be reused to install the new billet recovery point.

Step 3 – Install the Billet Recovery Point

Position the Bonobo Products Billet Recovery Point so it aligns with the factory mounting hole.

Insert the original OEM bolt through the recovery point and thread it in by hand. This helps ensure the bolt starts correctly and prevents cross-threading.

Step 4 – Tighten the Bolt

Tighten the OEM bolt until the recovery point is securely mounted.

Do not overtighten the bolt. If you have a torque wrench, tighten the hardware according to Toyota's factory torque specifications.

Once installed, verify that the recovery point sits flush against the mounting surface and does not move.

Installation Complete

Your Bonobo Products 3rd Gen Tacoma Front Billet Recovery Point is now installed and ready for use.

The billet aluminum construction provides a clean factory-style appearance while adding a strong, reliable recovery attachment point for off-road use.

Recovery Safety

Always inspect your recovery equipment before every use.

  • Use only properly rated recovery straps, shackles, or soft shackles.
  • Inspect the recovery point and mounting hardware before performing any recovery.
  • Never exceed the working load limit of your recovery equipment.
  • Always follow safe recovery practices and use proper recovery techniques.

Need Assistance?

If you have any questions about installation or product compatibility, feel free to contact the Bonobo Products team. We're always happy to help.

Enjoy your new Billet Front Recovery Points and we'll see you on the trail.